Component testing (singlemode only, through DLL interfaces)
One sequence for insertion loss, reflectance, optical return loss and
fiber length measurements for all wavelengths
Mandrel-free measurement with one-meter resolution
IQS-12001B
Cable Assembly and Component Test System
www.EXFO.com
Best Performance in the Industry
Test faster, increase your productivity
Cable assembly testing
Insertion loss and reflectance measurements on four wavelengths in
ten seconds flat
Mandrel-free reflectance measurement
Capability to measure singlemode reflectance (discreet reflection)
down to –75 dB, meeting the requirements of even the most
demanding FTTH applications
Accurate, repeatable and flexible
EXFO has developed an innovative detector assembly for the IQS-12001B.
Using wide-aperture integrating cavity packaging, the detector has many
properties that make it ideal for interconnect testing. The wide aperture allows
it to be used for simplex and multifiber connectors. Because it uses integrating
cavity technology, connector alignment is less critical and polarization
dependence is negligible. The end result is increased accuracy, repeatability
and flexibility.
Combining an integrating cavity with a detector and the right diameter input
port provides a major advantage: power measurements are independent of the
fiber’s numerical aperture, ferrule polish (PC or APC) and alignment, since the
cavity scatters all incident light, with the same average power reaching the
detector. Integrating cavity technology is a built-in feature of the two detectors
used with the IQS-12001B Cable Assembly and Component Test System,
the IQS-3250/3250B Loss Test Module and the IQS-9403 Loss Meter.
Calibration verification tool
Reflectance referencing can also be achieved through the CKT-30 Singlemode Reflectance Reference module. Using the IQS-12001B’s
reflectance verification wizard, you can perform a step-by-step verification of your system’s reflectance calibration. As long as it is within
≤ 0.5 dB to that of the CKT-30, you know your system meets calibration specifications and don’t need to send it to EXFO for verification—
avoiding unnecessary downtime.
Integrating cavity diagram.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals